Our Products

CS SEAMLESS ROUND PIPE ASTM A333 GR.9 / CARBON STEEL ROUND SEAMLESS PIPE ASTM A333 GR.9


Astm A333 Gr 6 Pipe, Gas Pipes and SA 333 grade 6 Schedule 40 Pipe supplier and exporter in India

Apart from alloy steel, the specification for A333 Grade 6 covers carbon steel pipes. At Aesteiron, we supply A333 Pipe Material in both a seamless and welded manner. This ASTM specified Carbon Steel A333 Grade 6 Seamless Pipes has been designed with the intention of being used in low temperature environments. The carbon based ASTM A333 gr6 Round Pipe can be manufactured by either a seamless or welding process without any addition of a filler metal to be used in the welding operation. According to the specification, all A333 seamless pipe and welded pipes are required to be treated to control their microstructure.


SPECIFICATIONS

Tests such as impact tests, tensile tests, hydrostatic tests, and non-destructive electric tests are to be conducted on the LTCS ASTM A333 Gr 6 SMLS Pipe in accordance to the requirements of this particular specification. The use of ASME sa333 grade 6 Schedule 40 Pipe should be kept to a maximum temperature of about 570 Degree F. Pre – heating the sa333 gr6 Bevelled End Pipe is neither required nor is a post weld heat treatment for these pipes necessary. Under this specification, All seamless and welded pipes produced from API 5L A333 Gr 6 Material needs to be treated in such a manner that their microstructure can be controlled using any of the following methods i.e. - Normalizing the A333 Grade 60 pipes, Quenched and Tempered or Double Normalizing the  SA333 gr 6 welded pipes following which the pipe is then to be tempered. Contact Aesteiron for a quick quote and learn more about the price for ASTM A333 Grade 6 Pipes. The advantage to choose Astm A333 Grade 6 Pipe Manufacturers is to get 10% lower price compare to stockist and supplier in Mumbai and Prime quality material with Manufacturer test Certificate.

Table Of Content



§  What Is Astm A333 Grade 6?

§  ASTM A333 Grade 6 Pipe Price

§  A333 Gr 6 Pipe Types

§  Astm A333 Grade 6 Pipe Specification

§  ASTM A333 Grade 6 pipe pressure rating

§  List of A333 Pipes & Tubes used in oil & gas industry

§  Astm A333 Grade 6 Pipe Weight Chart

§  Astm A333 Grade 6 Pipe Schedule

§  Astm A333 Grade 6 Vs A106 Grade B

§  Astm A333 Grade 6 Equivalent

§  Astm A333 Grade 6 Pipe Equivalent

§  SA333 gr 6 standards

§  ASTM A333 temperature range

§  A333 Steel mill tolerance

§  ASTM A333 Gr.6 Carbon Steel Pipe Chemical Composition Chart

§  Astm A333 Grade 6 Allowable Stress

§  SA 333 gr 6 Pipe Mechanical Properties Tensile Strength

 

What Is Astm A333 Grade 6?

ASTM A333 Grade 6 covers seamless and welded steel pipe for low temperature service. The Grade 6 alloy steel involved is similar to AISI 4032 low alloy steel. A333 Gr 6 Pipe Used for low temperature service piping down to minus 50 F or 10°C. the Machinability of LTCS ASTM A333 Gr 6 SMLS Pipe is good, similar to law alloy 4032 steel.

A333 Gr 6 Pipe Types

ASTM A333 Gr 6 Pipe

A333 Gr 6 Seamless Pipe

A333 Gr 6 Welded Pipe

SA 333 Gr 6 Carbon Steel Erw Pipe

LTCS ASTM A333 Gr 6 SMLS Pipe

ASME SA333 grade 6 Schedule 40 Pipe

ASTM A333 grade 6 SMLS BE SCH40 Seamless pipe

ASTM A333 GRADE 6 TUBE

6 Inch astm a333 grade 6 seamless Steel Pipe

20 Inch SCH20 ASTM A333 Grade 6 SMLS pipes

STM A333 Grade 6 SCH80 seamless carbon steel pipe

14" sch160 ASTM A333 grade 6 pipe

4 Inch Schedule 40 a333 Grade B Steel Pipe

ASTM A333 Gr.6 Low Temperature Seamless Steel Pipe

6"seamless schedule 40 ASTM a333 Grade 6 carbon steel pipe

Astm A333 Grade 6 Pipe Specification

Manufacturer and supplier of Beveled End ASTM A333 gr6 Round Pipes and API 5L A333 Grade 6 LTCS SMLS Material standard sizes

Grades

A333 Gr 1, A333 Gr 3, A333 Gr 4, A333 Gr 6, A333 Gr 7, A333 Gr 8, A333 Gr 9, A333 Gr 10, A333 Gr 11 Seamless Pipes

Codes and Standards

ANSI, ASME, ASTM, API, SAE, BS, AGA, AWWA, ISO, DIN

Dimensions

ASME/ ANSI B36.10 / 19

Standard Size

1/2” NB to 36” NB (LSAW, SSAW, HSAW)

Wall Thickness

3-12mm

Schedules

SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS Manufacturer and Supplier

Producing techniques

Seamless / ERW / Welded / Fabricated / CDW / EFW

Available Shapes

Round, Half Round, Square, Rectangular or Custom shape

Length

3 to Max18 Meters or custom

End

Beveled End, Plain End, Treaded

Manufacturer Test Certificate

EN 10204 3.1 B

Pipe Marking

All A333 Gr 6 pipes are marked as follows: Supplier or Manufacturer’s Name, Grade, Standard, OD, Thickness, Length, Heat No. (Or according to the customer’s request.)

Many a333 grade 6 pipe distributors, suppliers, stockist, exporters, importers, dealers, and stockholders procure the material good deal from Aesteiron and supply in their own countries with high margin, so always buy directly from Astm A333 Grade 6 Pipe Manufacturers in India to get the best price. Contact us now for Free quote !!!

List of A333 Pipes & Tubes used in oil & gas industry

Saudi Aramco approved Supplier of Carbon Steel A333 gr 6 Material for Oil & gas industries, Astm A333 Grade 6 Pipe Manufacturers as per ASME B36.19/ B36.10 specification

Carbon Steel A333 Rectangular Pipes

SA 333 gr 6 Hollow Pipes

Large Diameter Seamless Carbon Steel A333 Grade 6 Pipe

Schedule 80 Seamless ASTM A333 Grade 6 Pipes

ASTM A333 Erw Pipes

ASTM A333 Gr 6 Carbon Steel Casing Pipes

Carbon Steel A333 Grade 6 Schedule 40 Pipes

ASME B36.19 LTCS ASTM A333 Gr 6 Pipes

ASTM A333 Gr.6 Carbon Steel Schedule 10 Pipes

ASTM A333 Grade 6 Double Wall Pipe

SA 333 gr 6 Efw Pipes

Epoxy lined Carbon Steel A333 Pipes

ASTM A333 Gr 6 Carbon Steel Round Pipes

PTFE lined ASTM A333 Gr 6 Carbon Steel Natural Gas Pipes

ASTM A333 Grade 6 Seamless Pipes

Seamless Black ASTM A333 Gr.6 Carbon Steel Pipes

Carbon Steel A333 Welded Pipes

SA 333 gr 6 Oval Pipes

LTCS ASTM A333 Gr 6 Drill Pipes

Carbon Steel A333 Grade 6 Grooved Pipes

ASTM A333 Grade 6 Square Pipes

ASTM A333 Gr.6 Carbon Steel Hydraulic Pipes

Epoxy Coated LTCS ASTM A333 Gr 6 Pipes

Cement lined ASTM A333 Grade 6 Pipes

Schedule 40 Seamless Carbon Steel A333 Pipes

Thin Wall Carbon Steel A333 Pipes

Astm A333 Grade 6 Pipe Weight Chart

 

Astm A333 Grade 6 Vs A106 Grade B

ASTM A333 Grade 6 determination covers seamless and welded carbon and alloy steel pipe which utilized in low-temperature working conditions. ASTM A333 is a decent substitute for A106-B for a wide scope of temperatures. Based on ASME B31.3 the reasonable pressure for A106 Grade B is 16ksi to 500F; for A333 grade 6 is 20Ksi to 400F and 18.9ksi to 500F It would be reasonable for say that, given the application has a working temperature greater than - 20F, either A106 or A333 materials will be satisfactory. However, below - 20F, just the A333 will be satisfactory to - 50F.

ASTM A333 Gr 3 Pipe Chemical Formula

 

 

Composition, %

 

Element

Grade 1

Grade 3

Grade 6

Carbon, max

0.30

0.19

0.30

Manganese

0.40 – 1.06

0.31 – 0.64

0.29 – 1.06

Phosphorous, max

0.025

0.025

0.025

Sulfur, max

0.025

0.025

0.025

Silicon

0.18 -0.37

0.10 min

Nickel

3.18 – 3.82



ASTM A333 Grade 3 Seamless Pipe Mechanical Strength

Grade

Yield Strength (Mpa)

Tensile Strength (Mpa)

Elongation (%)

Grade.3

≥450

≥240

30%



LTCS SA333 Gr 3 Carbon Steel Pipes Tensile Requirements

LTCS ASTM A333 Gr 3 Pipe available with Oil-dip coating, Varnish, Phosphating or Passivation Surface finish

 

Grade 1

Grade 3

Grade 6

psi

MPa

psi

MPa

psi

MPa

Tensile Strength, min

55,000

380

65,000

450

60,000

415

Yield Strength, min

30,000

205

35,000

240

35,000

240

Longitudinal

Transverse

Longitudinal

Transverse

Longitudinal

Transverse

Elongation in 2 in. or 50 mm, (or 4D), min, %:

Basic minimum elongation for walls 5/16 in. [8 mm] and over in thickness, strip tests, and for all small sizes tested in full section

35

25

30

20

30

16.5

When the standard round 2-in. or 50-mm gage length or proportionally smaller size test specimen with the gage length equal to 4D (4 times the diameter) is used

28

20

22

14

22

12

For strip tests, a deduction for each 1/32in. [0.8 mm] decrease in wall thickness below 5/16 in. [8 mm] from the basic minimum elongation of the following percentage

1.75

1.25

1.50

1.00

1.50

1.00

Elongation in 2 in. or 50 mm, min, %:

 

 

1. ASTM A333 Chemical Composition Requirements

Chemical Composition of ASTM A333

Element

Grade 1, %

Grade 3, %

Grade 4, %

Grade 6, %

Grade 7, %

Grade 8, %

Grade 9, %

Grade 10, %

Grade 11, %

C

0.30

0.19

0.12

0.30

0.19

0.13

0.20

0.20

0.10

Mn

0.40–1.06

0.31–0.64

0.50–1.05

0.29–1.06

0.90

0.90

0.40–1.06

1.15–1.50

0.60

P

0.025

0.025

0.025

0.025

0.025

0.025

0.025

0.035

0.025

S

0.025

0.025

0.025

0.025

0.025

0.025

0.025

0.015

0.025

Si

...

0.18–0.37

0.08–0.37

0.10 min

0.13–0.32

0.13–0.32

...

0.10–0.35

0.35

Ni

...

3.18–3.82

0.47–0.98

0.40

2.03–2.57

8.40–9.60

1.60–2.24

0.25

35.0–37.0

Cr

...

...

0.44–1.01

0.30

...

...

...

0.15

0.50

Cu

...

...

0.40–0.75

0.40

...

...

0.75–1.25

0.15

...

Al

...

...

0.04–0.30

...

...

...

...

0.06

...

V

...

...

...

0.08

...

...

...

0.12

...

Cb

...

...

...

0.02

...

...

...

0.05

...

Mo

...

...

...

0.12

...

...

...

0.05

0.50

Co

...

...

...

...

...

...

...

...

0.50

*For Grade 1 and 6, each reduction of 0.01% C below 0.30%, an increase of 0.05 % Mn above 1.06 % would be permitted to a max. of 1.35%.
*For Grade 6, the limit for columbium may be increased up to 0.05 % on heat analysis and 0.06 % on product analysis.
*Generally, the carbon equivalent C.E = [C + Mn/6 + (Cr + Mo + V)/5 + (Ni + Cu)/15] shall not exceed 0.43% by heat analysis.

2. ASTM A333 Mechanical Properties

 

ASTM A333

Tensile Strength, min.

Yield Strength, min.

Elongation %, min.

Grade

psi

MPa

psi

MPa

Longitudinal

Transverse

Grade 1

55 000

380

30 000

205

35

25

Grade 3

65 000

450

35 000

240

30

20

Grade 4

60 000

415

35 000

240

30

16.5

Grade 6

60 000

415

35 000

240

30

16.5

Grade 7

65 000

450

35 000

240

30

22

Grade 8

100 000

690

75 000

515

22

...

Grade 9

63 000

435

46 000

315

28

...

Grade 10

80 000

550

65 000

450

22

...

Grade 11

65 000

450

35 000

240

18

...

*The elongation values are furnished on the basis of standard round  2 inch or 50 mm(or 4D) specimens.
*Elongation of Grade 11 is for all walls and small sizes tested in full section.

 

 

 

 

 

 

 

3.  Charpy V-notch Impact Tests

 

Impact Requirements for Grades 1, 3, 4, 6, 7, 9, 10, and 11

Size of Specimen

*A

*B

mm

ft·lbf

J

ft·lbf

J

10 by 10

13

18

10

14

10 by 7.5

10

14

8

11

10 by 6.67

9

12

7

9

10 by 5

7

9

5

7

10 by 3.33

5

7

3

4

10 by 2.5

4

5

3

4

*A denotes minimum average notched bar impact value of each set of three specimens.
*B denotes minimum notched bar impact value of one specimen only of a set.

Minimum Impact Test Temperature of ASTM A333

Grade

°F

°C

1

-50

-45

3

-150

-100

4

-150

-100

6

-50

-45

7

-100

-75

8

-320

-195

9

-100

-75

10

-75

-60

11

-320

-195

* Impact tests specified for temperatures lower than 70 °F [20 °C] should be made with precautions.