Ferrous And Non Ferrous Metal Products

We hold expertise in manufacturing and supplying an exquisite array of Ferrous and Non Ferrous Metal Products. All these products are widely used in various industrial applications owing to their fabrication in diverse shapes and sizes. Moreover, clients can avail these products from us at industry leading prices. Availed by our number of clients across the nation, we offer the following products under this category:

Pipe Fittings

We are one of largest manufacturers, importer and exporters of pipe fittings.

We carry butt weld stainless pipe fittings and socket weld stainless fittings in a variety of sizes.

Product range:
The following table represents size range, product standards and material grades of pipe fittings

Type butt-welding, forged/casting thread socket-weld, elbows, tees , reducer, stubend, unions, caps, nipples couplings, elbowlets, weldolets etc.
Item 90° elbow ( long radius / short radius ), equal tee,45° elbow ( long radius / short radius ), reducing tee, round cap, concentric reducer, eccentric reducer, stub end
Stainless Steel Material astm a403 wp304 / wp304l / wp316 / wp316l / 316 ti / 321 / 310 / 347 / 904l
Carbon Steel Material astm a234 wpb, wpc astm a105
Alloy Steel Material astm a234 wp1, wp5, wp9, wp11, wp22, wp91
Dimension ansi b16. 9 / mss sp- 43 / jis b2313
Thickness sch5s / sch10s / sch40s / sch80s / sch 120s
Size 1/2" - 48"
Method seamless and erw
Make manufacturer & as per design & specification






Sheets & Plates

Description
Stainless Steel

Size range
1000 x 2000, 1220 x 2440, (4' x 8'), 1250 x 2500, 1500 x 3000 to 6000, 2000 x 4000 to 6000

Thickness
0. 3 mm to 120 mm

Specification
a-240

Grades
304, 304l, 304h, 316, 316l, 316ln, 316ti, 309, 310s, 317l, 321, 347, 409, 410, 420, 430, 446, 202 etc.

Shape
coils, foils, shim sheet, perforated sheet, chequered plate, strip, flats, blank (circle), ring (flange) etc.

Manufacturer
jindal
sail
shah alloys
imported etc.

Note :-

Sheet Finishing 2b, 2d, hr, cr, ba (no. 8), satin (met with pvc coated)
Value Added Service cladding, heat treatment, annealed, pickling, polish, rolling, cutting, bending, forging, minor fabrication etc.
Test Certificate manufacturer test certificate, laboratory test certificate from govt. Approved lab. , under third party inspection.
Specialize shim sheet, perforated sheet (round, square & oblong hole) & as per your drawing





Seamless Tubes

Description
Seamless Tube

Size Range
6. 35 mm od to 101. 6 mm od 20 swg. , 18 swg. , 16 swg. , 14 swg. , 12 swg. , 10 swg.

Specification
a-213


Grades
tp 304, tp 304h, tp 304l, tp 304ln, tp 316, tp 316h, tp 316l, tp 316ln, tp 316ti, tp 309, tp 310, tp 317l, tp 321, tp 347, tp 409, tp 410, tp 420, tp 430, tp 446, tp 202, etc.

Shape
round, coil, 'u' shape, square, rectangular, hydraulic, tube, etc

Lenght
standard & cut length

Manufacturer
ratnamani & imported

Description
Welded (erw) Tube

Size Range
6. 35 mm od to 152 mm od 20 swg. , 18 swg. , 16 swg. , 14 swg. , 12 swg. , 10 swg.

Specification
a-249

Manufacturer
suraj, prakash, vishal
decora & imported





Metal Fasteners

Material
Stainless Steel, High Tensile, Nickel Alloy, Alloy Steel, Mild Steel, Copper, Brass, Aluminium

Size Range
m02 to m100

Specification
is bs astm

Grades
304, 304l, 316, 316l, 309, 310, 317l, 321, 347, 409, 410, 420, 430, 446, 202, etc.

Lenght
3 mm to 1000 mm

Manufacturer
gkw
unbrako
kundan
apl
sundaram precision
eby fastener etc

Note :-

Nickel Alloy In hastelloy, cupro nickel, nickel, monel, inconel, alloy 20 etc.
Type of Fasteners bolts (eyebolt), stud, nuts (nylock, lock), washer (star, plain), allen caps, screws (csk, pen head, philip, mushroom, cheese), clamp (u, j, l), grab, rivet (pop & hollo) etc.
Specializes as per drawing we manufacture.






Metal Pipes

Description
Seamless Pipe

Size Range
15 nb to 300 nb sch. 5s sch. 10s sch. 40s sch. 80s sch. 160s sch. Xxs

Specification
a-312


Grades
p 304, tp 304h, tp 304l, tp 304ln, tp 316, tp 316h, tp 316l, tp 316ln, tp 316ti, tp 309, tp 310, tp 317l, tp 321, tp 347, tp 409, tp 410, tp 420, tp 430, tp 446, tp 202, etc.

Shape
round, coil, 'u' shape, square, rectangular, flexible pipe, shaft, oval, hydraulic pipe, etc

Lenght
standard & cut length

Manufacturer
imported
choksi
remi &
ratnamani

Description
Welded (erw) Pipe

Specification
a-312

Manufacturer
remi
ratnamani
vishal
suraj
c. D. Prakash
heavy
imported etc.

Description
Welded (erw) Pipe

Specification
a-358

Manufacturer
fabricated at famous
prakash
vishal (with radiography)

Note:-

Special Pipes fabricated pipe (with radiography)
Value Added Service draw & expansion as per required size & length, polish (electro & commercial) heat treatment, bending, annealed & pickled, sand blasting, machining, etc.
Test Certificate (i) manufacturer test certificate, (ii) laboratory test certificate from govt. Approved lab. , (iii) under third party inspection.
Specialize fabricated pipe, square & rectangle & other odd size.






Pipe Flanges

For Stainless Steel Flanges, Citizen Metals is your number one source. We manufacturing A.S. Pipe Flanges, M.S. Stainless Steel Flanges and Backup Stainless Pipe Flanges. Our Pipe Flanges come in a wide selection of dimensions and alloys.

If you require Stainless Steel Flanges, contact us and one of our representatives will be happy to help you order just what you need. We are also available to answer questions you may have about our pipe flanges or any of our other products.

Item Welding Neck, Slip-On, Screwed, Socket Welding, Lap Joint, Blind, Plate uyjhmn67
Flange Facing Raised Face, Flat Face, Lapped Joint Face, Large Male-Female, Small Male-Female, Large Tongue & Groove, Small Tongue & Groove, Ring Joint
Standard 125 Lb, 150 Lb, 300 Lb, 600 Lb, 900 Lb, 1500 Lb, 2500 Lb, 3000 PSI, 5000 PSI & 10000 PSI
Carbon Steel Material ASTM A-105, IS 2002, LF2
Stainless Steel Material ASTM, A-182, F 304, F 304L, F 310, F316, F 316L, F 321, F 347, F904L
Alloy Steel Material ASTM A182 F1, F5, F9, F11, F12, F22, F91
Low Temperature ASTM A350 LF2, LF3
Low Temperature ½" NB to 48 "NB
Make Manufacturer & As per design & Specification






Industrial Valves

Material
Stainless Steel, Carbon Steel, Alloy Steel, Gun Metal, Brass Bronze, Forge, Cast Iron, Cast Steel, Mild Steel

Size Range
¼" to 8"

End Connection
screwed [npt], socket weld, flanged end, screwed parallel, screwed taper

Pressure Class
class 150, class 300, class 600, class 800, class 1500, class 2500

Specification
astm bs din asa sis

Grades
stainless steel : f 202, f 304, f 304l, f 316, f 316l, f 410, etc.
carbon steel : astm a-105, lf2
alloy steel : f5, f11, f22

Manufacturer
audco, leader, bhel, spirax, klinger, lender, neta, hammer, spirax marshall etc.

Note :-

Type of valves check valve, gate valve, globe valve, needle valve, butterfly valve, ball valve [single piece, three piece, multi port], plug valve, strainer ('y') stop valve, non return valve, diaphragm valve, safety valve, pneumatic actuators valve etc.
Test certificate manufacturers test certificate, ibr test certificate
Specialize ibr valves [astm a-105]






Beams, Angle, Channel, Tees & Tray

Material
Stainless Steel, Mild Steel, Aluminium, Copper, Brass

Size Range
angles : 20 mm x 20 mm x 3 mm thk. , 25 mm x 25 mm x 3 mm thk. , 25 mm x 25 mm x 5 mm thk. , 30 mm x 30 mm x 3 mm thk. ,to 100 mm x 100 mm x 12 mm thk. Etc.

m. S. Channel : 75 mm x 40 mm, 100 mm x 50 mm, 125 mm x 65 mm, 150 mm x 75 mm, 175 mm x 75 mm, 200 mm x 75 mm 225 mm x 80 mm, 250 mm x 80 mm, 300 mm x 90 mm, 350 mm x 100 mm, 400 mm x 100 mm etc.

beam : 100 mm x 70 mm, 120 mm x 58 mm, 125 mm x 70 mm, 125 mm x 75 mm, 150 mm x 75 mm, 175 mm x 85 mm 200 mm x 100 mm, 250 mm x 125 mm, 300 mm x 140 mm, 350 mm x 140 mm, 400 mm x 140 mm etc.

Specification
is

Grades
202, 304, 316

Lenght
6 mtrs. Max.

Shape
rolling, extruded

Manufacturer
sail

Note :-

Specialize
as per drawing





Alloy Steel

18 % W, 18 % W + 5 % Co, 18 % W + 10 % Co, 6/5/2, 9 % W, 5 % Cr, HCHC, OHNS, V6N, Magnetic, Non-Megnetic, EN-8, EN-9, EN-19, EN-24, EN-30 B, EN-31, EN-36, EN-45, EN-47, SAE, 16M/N CR5, 20 M/N CR5












Non Ferrous Metal

Monel, Hastelloy, Incoloy, Aluminium, Lead, Chromium, Cobalt, Copper, Iron, Magnesium, Manganese, Molybdenum, Nickle, Silicon, Titanium, Tungsten, Tin, Zinc










Non Ferrous Pipes

Nandishwar steel offers Non Ferrous Pipes and Tubes. The specification of Non Ferrous Pipes are as follows:






Material
Copper
Brass
Aluminium
Phosphorus Bronze
Gun Metal
Lead

Size
2 mm OD to 152 mm OD

Swg.
16 Swg.
14 Swg.
12 Swg.
10 Swg.

Specification
IS
BS
ASTM

Manufacturer
Indian





Non-Ferrous Metals

We are engaged in the supplying of variety of products made from best quality Non-Ferrous Metals, by our reliable vendors. Non-ferrous metals are very useful and are required in a range of industrial applications in the form of bar, wire, PVC coated copper coil, coils, round, sheets, plates, channel, angle and pipes. Our range of non- ferrous metals includes copper, brass, aluminum, bronze, gunmetal, zinc and lead etc. We maintain large stocks of these products to meet urgent and bulk requirements of our clients








Non Ferrous Metals

Brass rods, squares, hexagonal, strips, flat sheets, pipes & tubes & nut bolts, copper rods, strips, copper sheets, pipes etc. Refrigeration & air-conditioner copper tubes (pvc coated) in coil form. De-oxidised copper tubes, 70/30 alloy brass tube copper pipe fittings, elbow, tee coupling, reducer and nipple. Gun metal - ingots, rods, hollow bars & bushes etc. (85/5/5/5 & 88/1012 quality). Aluminium - rods, tubes, angles, flat sheets & plates are available in all sizes. Cupro nickel tubes as per customers specifications. Nickel alloy - monal, nickel, inconel, lead, zinc, tin, bismuth, hasto alloy & ferro alloys.






Ferrous & Non Ferrous Metal

Stainless Steel -Sheet, Plate, Rods, Pipe, Circle, Fitting, Wire, M.S. , Aluminium, Copper, Bara Alloys Steel.

Other Information
  • Pay Mode Terms: L/C (Letter of Credit)
  • Minimum Order Quantity: 100M Ton
  • Port of Dispatch: By Taransport
  • Production Capacity: 100MTon
  • Delivery Time: Order Depend
  • Packaging Details: Extra -Wooden,Package,Plastic,Other





Non-Ferrous Metal Alloy

These Non-Ferrous Metal Alloys are widely acclimated in the accomplishment of huge numbers of products. Our non-ferrous metal alloy supports versatile and stiffness strength. We offer economic price on our products which will definitely draw attention of our clients. We have captured the global market with our matchless non-ferrous metal alloy.